Closed cell Neoprene/PVC/Nitrile sponge rubber is an economical sealing and gasket material for applications requiring a good resistance to chemicals and conformance with UL 94 flammability ratings. This material blend exhibits the best properties from each individual elastomer and performs well in temperatures ranging from -40° F to +200° F.
Closed cell Neoprene/PVC/Nitrile rubber is one of many materials available at Gasket Supply for custom & CNC or waterjet cut seals and gaskets used in a diverse range of industrial and commercial applications.
Gasket Supply is a leading manufacturer of gaskets and CNC cut parts fabricated from Neoprene/PVC/Nitrile closed cell sponge.
The combination of these elastomer materials creates a blend that performs well in automotive applications, specifically as tail lamp gaskets or seals.
The properties of Neoprene/PVC/Nitrile make this sponge rubber gasket and sealing material ideal for electrical enclosures and other electrical sealing applications that require a UL 94 rated gasket material.
Neoprene/PVC/Nitrile rubber blend works well as a gasket tape or gap seal on duct work for HVAC units and creates an air tight seal in metal-to-metal bonding applications.
With its closed cell structure, Neoprene/PVC/Nitrile is a suitable weatherproofing gasket and seal material for electrical enclosures exposed to outdoor elements.
IS NEOPRENE/PVC/NITRILE RUBBER THE BEST CHOICE FOR YOUR APPLICATION?
Do you need materials in your application to be fire-rated? If so, this closed cell sponge rubber blend meets flammability ratings, including UL 94 HF-1, UL 94 HBF, and UL 94 VO, which is the most stringent rating under UL 94, as well as FMVSS-302. See the specification sheets to the right to find out the other specifications this rubber gasket and elastomer seal material meets.
Need to reduce assembly time in your your gaskets and seals? If so, Gasket Supply can recommend the best adhesive for your specific application and supply Neoprene/PVC/Nitrile with an adhesive backing on one or both sides.
Our Neoprene/PVC/Nitrile sponge rubber gasket and seal material is available in three densities: 4pcf (IV1); 6pcf (IV2); and 8pcf (IV3). This closed cell sponge rubber blend is available in rolls 1/16″ thick up to 1-1/4″ thick and 54″ wide by 50′ long. Made in continuous rolls without splices, CNC cut or waterjet cut to size or slit to rolls as narrow as ¼” wide up to 54″ wide. Our team can also slit rolls to any configuration needed to your exact specifications.